I cannot connect to wifi espeasy flash the firmware with esptool.py on esp8266

ForumCategory: esp8266I cannot connect to wifi espeasy flash the firmware with esptool.py on esp8266
Rien Woerden asked 4 weeks ago

I cannot see wifi after flashing.

Data:
Command: esptool.py –port COM6 write_flash -fm dio -fs 1MB 0x00000 ESPEasy_v2.0.0-dev11_normal_4096.bin

Result: esptool.py v3.0
Serial port COM6
Connecting….
Detecting chip type… ESP8266
Chip is ESP8266EX
Features: WiFi
Crystal is 26MHz
MAC: 80:7d:3a:3d:9a:9b
Uploading stub…
Running stub…
Stub running…
Configuring flash size…
Flash params set to 0x0220
Compressed 558896 bytes to 368940…
Wrote 558896 bytes (368940 compressed) at 0x00000000 in 32.6 seconds (effective 137.2 kbit/s)…
Hash of data verified.
Leaving…
Hard resetting via RTS pin…

Click to rate this post!
[Total: 0 Average: 0]
1 Answers
christophe Staff answered 4 weeks ago

Hello Rien
Did you see a new network on your computer ? You have to connect to it. Normally a page will appear automatically to configure the Wifi network. If this is not the case, you must open a browser and enter the url http://192.168.4.1

Click to rate this post!
[Total: 0 Average: 0]
DIY Projects