The Chromium browser installed by default on Raspberry Pi OS allows like all internet browsers to open a web page in full screen. Kiosk mode is used to display a Node-RED Dashboard, the interface of a home automation server such as Jeedom, Domoticz, Home Assistant. Combined with a touch screen, you can easily control your home automation accessories from any room in the house.
To control home automation accessories, it is best to run the home automation software on a NAS or on another Raspberry Pi.
You can, of course, just press the F11 key to bring up the browser in full screen. However, you have to do it manually every time after launching the browser. By running the browser in Kiosk mode, the application will automatically launch in full screen. Users cannot bring it back to normal window by pressing F11 key.
When you run browsers in Kiosk mode,
- User cannot see desktop or operating system details
- The X (close) button is hidden
- The F11 key is disabled
- Menu bars, toolbars are not visible
- The status bar at the bottom is not visible
- Right click context menu does not work
- Destination links are not visible when hovering over links
Open a Terminal and run this command to verify that Chromium is correctly installed on the system (this is the case by default).
chromium-browser --version --disable-quic --enable-tcp-fast-open --ppapi-flash-path=/usr/lib/chromium-browser/libpepflashplayer.so --ppapi-flash-args=enable_stagevideo_auto=0 --ppapi-flash-version= Chromium 78.0.3904.108 Built on Raspbian , running on Raspbian 10
If Chromium is not installed, run the following command to do so
sudo apt-get install --no-install-recommends chromium-browser
Minimum configuration on Raspberry Pi OS Lite
To be able to start Chromium, the X11 graphics rendering engine must be installed. If you are using the Desktop version of Raspberry Pi OS, you can skip to the next paragraph.
The Lite version is the minimum version without a graphical interface suitable for servers or the Raspberry Pi Zero WH.
Run the following command
sudo apt-get install --no-install-recommends xserver-xorg x11-xserver-utils xinit
At the end of the installation, launch X11 by executing the command
Test Chromium startup in Kiosk mode
Run the following command, replacing the blog’s internet address with the web page you are interested in, for example Domoticz at http://localhost:8080/#/Dashboard
/usr/bin/chromium-browser --kiosk https://diyprojects.io
Here is the test performed with a Waveshare 1024 x 600 pixel touchscreen.
Open a web page automatically when starting Raspberry Pi OS
To launch Chromium automatically and open a Web page, all you have to do is modify the autostart file on the LXDE desktop. Start by opening the configuration file
sudo nano /etc/xdg/lxsession/LXDE-pi/autostart
Then add the following commands without forgetting to modify the page to load at startup
@lxpanel --profile LXDE-pi @pcmanfm --desktop --profile LXDE-pi @xscreensaver -no-splash /usr/bin/chromium-browser --kiosk --disable-restore-session-state http://localhost:8080/#/Dashboard
Here, we start the Domoticz Dashboard
Save with the key combination Ctrl + X then Y.
If the connection to the WiFi network is not yet established, you may get a white screen at startup. To avoid this, you only need to modify a few boot parameters using the raspi-config utility .
Go to the Boot Options menu
Activer l’option B2 Wait for Network at Boot
Open the B1 Desktop / CLI option and choose the B4 Desktop Autologin Desktop GUI option which will automatically launch the graphical desktop without asking for the pi user password .
Raspberry Pi OS restarts and automatically opens the Domoticz Dashboard.
Here are some tips and frequently asked questions
How to exit kiosk mode (full screen)
Function key F11 is disabled in Kiosk mode. You must use the Alt + F4 key combination to exit full screen mode.
Can we access the Raspberry Pi with VNC in full screen mode?
Yes, absolutely, you can use VNC to use the RPi remotely from another computer connected on the same network. The displayed screen will be perfectly identical. To exit kiosk mode, use the Alt + F4 key combination .
Can we access the dashboard of a home automation server such as Domoticz or Home Assistant?
Yes, absolutely. You just have to indicate the address of the Dashboard in the autostart file of LXDE
Disable automatic start
Just comment out with the # character the chromium-browser command like this
# /usr/bin/chromium-browser --kiosk --disable-restore-session-state http://localhost:8080/#/Dashboard
Can we use a virtual keyboard?
There is a virtual keyboard called Matchbox. The problem is that it remains permanently in the foreground unlike the virtual Windows keyboard which is displayed only when the cursor is placed in an input field.
To install lMatchbox
sudo apt install matchbox-keyboard
2020/11/04 First publication of the article
- New M5PAPER ESP32 from M5Stack. eInk IoT or home automation dashboard
- Open an HTML page when starting Raspberry Pi OS with Chromium Browser in full screen (kiosk mode)
- Install Grafana on macOS and Raspbian for Raspberry Pi. How to create a Dashboard for MySensors IoT with Node-RED and InfluxDB
- Test Waveshare 7 inch 1024×600 pixel LCD touch screen with acrylic holder for Raspberry Pi
- Weather station with ePaper display (Dashboard) for Jeedom on Raspberry Pi (via the JSON RPC API)