ser2net: Serial USB...
 
Notifications
Clear all

ser2net: Serial USB Gateway to Ethernet. Test on RFLink with Domoticz


christophe
Posts: 253
Admin
Topic starter
(@chris)
Member
Joined: 5 years ago
wpf-cross-image

It is possible to move the bridge RFLink (read this previous article about how to make a Gateway) on another computer or Raspberry Pi by improve the reception of your devices for example. For this we will use ser2net, an Open Source project (official project page) that allows to publish on the Ethernet of the…

3 Replies
1378936244fef756e16f173078e81e7d?s=80&d=mm&r=g
Posts: 1
 Lech Jonczyk
Guest
(@Lech Jonczyk)
Joined: 4 years ago

Thanks for the great tutorial. I think the line below is not correct - I had to change it for me to work:
6000 /dev/8DATABITS NONE 1STOPBIT ttyACM0:57600

Reply
1 Reply
christopher 1
 Projets DIY
Guest
(@Projets DIY)
Joined: 5 years ago

Posts: 207

Hello Lech. Thank you very much for the tip. Have a good day

Reply
1be210177a0af50c16dce6416ba7b4ec?s=80&d=mm&r=g
Posts: 1
 Przemysław Rafał
Guest
(@Przemysław Rafał)
Joined: 4 years ago

Why /dev/8DATABITS?? I have RFLink433E and i dont see in my rasspberry /dev/8DATABITS.
In log ser2com i see: "Mar 14 1929 raspberrypi ser2net[31442]: Could not open device /dev/8DATABITS NONE 1STOPBIT ttyACM0 for port ...ctory"
I well try /dev/ttyACM0 its my rflink device but result is the same.

Sorry for my English.

Reply
Share:
Join Us!
Recent Posts
Last Articles
DIY Projects
DIY Projects