The Pi PoE Switch HAT (HAT) expansion board is used to power the Raspberry Pi 3 by drawing power from a POE Ethernet cable. This board is stacked on the extension connector (GPIO) of the Raspberry Pi 3. The RPI is powered directly by the GPIO. The PoE Switch HAT board comes with a mini Ethernet cable. It connects to the RJ45 Ethernet jack to connect the Raspberry Pi 3 to the local network. The Pi PoE Switch HAT has been designed to leave the GPIO connector available for your mounting. To “inject” power into an Ethernet cable, you will need a splitter and at least a 6A Ethernet cable. Choose a higher category for a distance of more than 20 meters.
Pi PoE Switch HAT Specifications
Compatible with IEEE 802.3af POE Ethernet (A & B mode), Power-over-Ethernet
Powering the Raspberry Pi 3 via the GPIO
Mini Ethernet cable to connect between the expansion board and the RPI to connect it to the local network.
Last Amazon price update was: 26 October 2020 2 h 01 min
× Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com (Amazon.in, Amazon.co.uk, Amazon.de, etc) at the time of purchase will apply to the purchase of this product.