5V 3A Power supply (3000mA) micro USB or USB-C for Raspberry Pi 4

Best Price

5V 3A Power supply (3000mA) micro USB or USB-C for Raspberry Pi 4

Share on facebook
Share on twitter
Share on linkedin
Share on email
Share on whatsapp
Share on telegram

A good power supply is essential for the proper operation of the Raspberry Pi. A power supply of at least 3A (3000mA) of USB-C type is necessary for the new Raspberry Pi 4 (2GB, 4GB or 8GB). The power consumption of the Raspberry Pi is very low but it is advisable to have at least 2A (10W). If you use USB devices or your projects use actuators or sensors on the GPIO connector, it is best to opt for a 3A (15W) power supply. If the operating system freezes or the Raspberry Pi is unstable (unexplained restart), it is probably because of a power supply too low or poor quality.

Warning. Some power supplies have a switch. Never use this switch to shut down the Raspberry Pi. You must stop the operating system from the menu bar or with the sudo halt command from the Command Terminal. Disconnecting the power supply when the Raspberry Pi is operating is the primary cause of data loss or deterioration of the Raspbian operating system.

Even with a quality SD board and power supply, remember to backup your data regularly or clone your SD board by following this tutorial.

5V / 3A micro USB power supply for Raspberry Pi or other nano-PC

This power supply may also be suitable for supplying your projects with connected objects based on ESP32 or ESP8266. Some generic Arduino development boards also use a micro-USB connector

5V / 3A USB-C power supply for new Raspberry Pi 4

The new models of Raspberry Pi 4 are equipped with a USB-C type connector. A power of at least 3A is necessary to power the new models of Raspberry Pi 4.

UPS HAT for Raspberry Pi

Expansion board (HAT) equipped with one or more high capacity batteries (18650) to power the Raspberry Pi 4 (or old models) in the event of a power failure (inverter or UPS system). The HAT UPS also makes it easy to develop mobile projects requiring battery operation. For example robotics, RC, autonomous navigation, data logger.

Click to rate this post!
[Total: 0 Average: 0]

Specification: 5V 3A Power supply (3000mA) micro USB or USB-C for Raspberry Pi 4

Type Wall Power Supply Charger
Country/Region of Manufacture

User Reviews

0.0 out of 5
Write a review

There are no reviews yet.

Be the first to review “5V 3A Power supply (3000mA) micro USB or USB-C for Raspberry Pi 4”

Your email address will not be published. Required fields are marked *

Last Amazon price update was: 6 December 2021 2 h 03 min
× Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com (Amazon.in, Amazon.co.uk, Amazon.de, etc) at the time of purchase will apply to the purchase of this product.

Other product categories

Price Drops
DIY Projects
DIY Projects